TM 9-2320-360-10
Table 3-1. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
TRANSFER CASE DOES NOT SHIFT INTO HIGH OR LOW OR SUPS OUT OF GEAR (CONT).
Step 3.
Check boot covering shift cable at transfer case for secure connection.
Check if mud or other debris has built-up on transfer case shift cable.
Clean mud or other debris from transfer case shift cable. Notify unit
maintenance if boot is damaged, loose, or missing or transfer case lever
will not shift.
3.
TRANS TEMP GAGE INDICATES OVERHEATING DURING NORMAL OPERATION (TRANS
TEMP GAGE READS OVER 300 F (149 C).).
Step 1.
Notify unit maintenance if transmission fluid level is low.
Step 2.
Shift transmission selector into lower gear and continue operation with
engine brake in low position if transmission fluid is correct.
Step 3.
Stop and let transmission cool if gage does not return to normal.
Step 4.
After gage returns to normal, shift to normal range and continue operation.
Notify unit maintenance if overheating persists.
3-29