TM 9-2320-366-10-2
(2) Position MAIN POWER switch (3) to OFF.
(3) Position toggle switch (4) to OFF.
(4) Connect cable (2) to MHC REMOTE CONTROL UNIT (1).
WARNING
Main panel Material Handling Crane (MHC) controls must not be
used when REMOTE CONTROL UNIT is connected. MHC may move
inadvertently. Failure to comply may result in injury to personnel.
NOTE
RH and LH REMOTE CONTROL UNIT hook-up is the same. RH REMOTE
CONTROL UNIT hook-up shown.
(5) Connect other end of cable (2) to RH REMOTE CONTROL HOOK UP receptacle (5).
(6) Position MAIN POWER switch (3) to ON.
(7) Lift guard (6) on toggle switch (4).
(8) Position toggle switch (4) to ON.
Change 1