TM 9-2330-366-10-2
2-69. PREPARATION FOR INTERNAL AIR TRANSPORT, HIGHWAY,
OR RAIL SHIPMENT (CONT)
CAUTION
Ensure area above cab is adequate before raising suspension.
Failure to comply may result in damage to equipment.
Do not operate vehicle off road without both air springs unpinned
and deflated. Failure to comply may result in damage to equipment.
(3) Turn SUSPENSION knob (1) to the LOWER position.
(4) Turn FUNCTION SELECT knob (2) to the TRUCK SUSPENSION position.
NOTE
Use back-up hydraulic pump (para 2-52) if pressing PUMP knob does
not accomplish step (5).
(5) Press and hold PUMP knob (3) until two safety pins (4) can be removed from
compression cylinder (5).
NOTE
Left and right side safety pins are removed from compression cylinders
the same way. Right side safety pins shown.
(6) Remove two safety pins (4) from compression cylinder (5).
2-812
Change 2