TM 9-2320-366-10-2
(1)
Start engine (para 2-27a or b).
(2)
Apply service brakes (para 2-27d).
(3)
Select the desired gear (para 2-27e).
(4)
Increase engine speed and slowly release service brakes.
a. Rear Axle Tire Chain Installation.
WARNING
Do not change tire pressure with tire chains installed. Changing tire
pressure with tire chains installed could result in chain slippage.
Failure to comply may result in serious injury to personnel or
damage to equipment.
CAUTION
When installing tire chains on vehicle rear wheels, ensure CTIS is in
HIGHWAY Mode at all times and maximum speed is 10 mph (16
km/h). Failure to comply may result in damage to equipment.
When tire chains are used they must be used on all four rear wheels.
Tire chains must not be used when driving on hard surfaces where there
is no wheel slippage. Failure to comply may result in damage to
equipment.
NOTE
Maximum speed limit for vehicles with tire chains on highways is 10 mph
(16 km/h). Maximum speed limit for vehicles with tire chains off highway is
15 mph (24 km/h).
Change 2