TM 9-2320-366-10-2
Table 3-2. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
x3.
NO POWER TO ENHANCED POSITION LOCATION REPORTING SYSTEM (EPLRS) (CONT).
(d)
Check circuit breaker (CB5) to see if it is tripped.
If circuit breaker (CB5) is tripped, push reset button in to reset.
If circuit breaker (CB5) trips again, notify Unit Maintenance.
Step (2) Check to see if Enhanced Position Location Reporting System (EPLRS) has power.
If EPLRS does not have power, notify Unit Maintenance.
(a)
Position electrical distribution block cover on power distribution shelf.
(b)
Tighten wing screw on electrical distribution block cover.
(c)
Install wing screw in power distribution shelf.
Change 2