TM 9-2320-366-10-2
Table 3-2. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
x. SPECIAL PURPOSE KIT (CONT)
x4. NO POWER TO
PRECISION LIGHTWEIGHT GLOBAL POSITIONING SYSTEM RECEIVER
(PLGR)
WARNING
Remove rings, brackelets, wristwatches, neck chains, and any other jewelry before
working around vehicle. Jewelry may catch on equipment or may short across an
electrical circuit. Failure to comply may result in serious injury or death to personnel.
Step 1. Check to see if circuit breaker (CB7) is tripped.
(a)
Remove wing screw from power distribution shelf.
(b)
Loosen wing screw on electrical distribution block cover.
(c)
Remove electrical distribution block cover from electrical distribution shelf.
(d)
Check circuit breaker (CB7) to see if it is tripped.
If circuit breaker (CB7) is tripped, push reset button in to reset.
If circuit breaker (CB7) trips again, notify Unit Maintenance.
3-84.22
Change 2