TM 9-2320-366-10-2
NOTE
Both front and rear tires
are removed the same
way. Rear tire is shown.
Air will not escape when
CTIS hose is removed
from hollow wheel stud.
(6) Remove banjo bolt (7), two
washers (8), and CTIS hose (9)
from hollow wheel stud (10).
NOTE
Studs and lugnuts on left
side of vehicle have left-
hand threads.
Turn
lugnuts to right to loosen,
and to left to tighten.
Studs and lugnuts on
right side of vehicle have
right-hand threads. Turn
lugnuts to left to loosen,
and to right to tighten.
(7) Loosen ten lugnuts (11).
3-93