Right rearview mirror may restrict visibility.
c. Adjust left and right rearview mirrors. Ensure both mirrors provide a clear
d. Ensure all windows are clean. If not, clean windows before attempting to move
Ensure all slack from seatbelt is removed. Seatbelt retracts and will
lock only during sudden stops or impact. Injury to personnel will result
if an accident occurs and seatbelt is not used or adjusted properly.
Fasten unused seatbelts to protect the belt ends from damage or dirt
Do not leave rotary switch in RUN position for extended periods of
time. Glow plugs will continue to cycle and batteries will discharge
leading to a no-start condition.
Glare from the sun may make it difficult to tell if the wait-to-start
lamp assembly is illuminated. If this occurs, shade the light with
your hands to ensure that the wait-to-start lamp assembly goes out
before attempting to start the vehicle.
Starting the engine before the wait-to-start lamp goes out can
result in starting problems.
e.1. Ensure all electrical switches (lights, wipers, and blower motor) in vehicle are
turned to OFF.
f. Turn rotary switch (1) to RUN and wait until wait-to-start lamp
assembly (2) goes out. Transmission indicator lamp (2.1) will be illuminated.