2-48. DEEP WATER FORDING (M1113, M1151, AND M1152)
(6) Clean and stow intake and exhaust assembly components.
(7) If fording operation was through salt water, wash and wipe off all salt
deposits as soon as possible.
To prevent parking brake linkage from binding, lithium grease should
be used after operating in water.
(8) Clean mud, grit, and debris from brake linkage. Apply lithium grease
(appendix D, item
14), and move linkage back and forth
to work into joints.
(9) After deep water fording operation, vehicle must be lubricated and
serviced by unit maintenance as soon as possible.