TM 9-2330-203-14&P
4-12. STOPLIGHT-TAILLIGHT REPLACEMENT (M197A1 AND M198A1).
This Task Covers:
a. Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Intervehicular cable disconnected from towing ve-
Two lockwashers
Tools/Test Equipment:
General mechanic's tool kit
a.
REMOVAL
1. Tag wires if identification bands are missing or illegible.
2. Remove two chassis wiring harness connectors (1) and stoplight-taillight shells (9i from retainer (2) and disconnect.
3. Remove two screws (8) and lockwashers (7) from stoplight-taillight (3). Remove stoplight-taillight from bracket
NOTE
Perform step 4 only if shells are damaged.
4.
If damaged, remove two washers (10) from shells (9). Remove shells from wires (6).
4-14