TM 9-2330-203-14&P
4-17. AXLE REPLACEMENT.
3.
Remove eight sleeve nuts (6), lockwashers (7), and four U-bolts (10) securing axle (2) to mounting plates (9). Discard
lockwashers.
4.
Carefully lower and remove axle (2) from springs (8).
b. INSTALLATION
WARNING
Axle is heavy and awkward to handle. Use caution, provide adequate support, and
use assistance during removal. Failure to follow this warning may result in serious
Injury to personnel.
1.
Position axle (2) under dolly and align axle spring seats (11) with mounting plates (9) on springs (8).
2.
Install four U-bolts (10) around axle (2), sides of springs (8), and through mounting plates (9) with eight new
TA51 0681
4-26