TM 9-2330-203-14&P
4-49. SPRING ASSEMBLY REPLACEMENT (M197 AND M198) (Con't.).
a.
REMOVAL
1.
Using jack, raise axle on side where spring assembly (4) is to be removed.
2.
3.
Remove cotter pin (19), nut (20), and fluid passage bolt (2). Discard cotter pin.
4.
Raise frame sufficiently to remove weight of dolly from spring assembly (4) and support on two jackstands.
5.
Remove nut (14), lockwasher (13), screw (11), and spacer (12). Discard lockwasher.
6.
Remove four sleeve nuts (7), lockwashers (6), and two U-bolts (18) securing axle to spring assembly (4). Discard
7.
Lower axle enough so that spring assembly (4) can be removed from spring seat. Remove spring assembly and
mounting plate (5).
8.
On M1 98, remove block (16) and pin (17) from spring seat.
4-114