TM 9-2330-205-14&P
SERVICE BRAKE - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
INSPECTION CRITERIA CONTINUED
NOTE
Repeat step 12 for other brakeshoe.
ASSEMBLY
Pins (3, 4, 5,
13.
Brakeshoes
Using 9/16-inch socket wrench, install.
and 6), four nuts
(1 and 2)
(7), and four
Iockwashers (8)
Four capscrews (10),
14.
Backing plate (9)
Using 9/16-inch socket and open-end
four Iockwashers
wrenches, install.
(11), four nuts
(12), adjuster (13),
and cable guide (14)
Four capscrews (10),
15.
Using 9/16-inch socket and open-end
four Iockwashers
wrenches, install.
(11), four nuts
(12), and
adjuster (15)
Brakeshoe (1)
Place in position.
16.
Nut (16), Iockwasher
Brakeshoe (1)
17.
Using 9/16-inch socket wrench, install.
(17), flat washer
(18), sleeve (19),
and bolt (20)
18.
Backing plate (9)
Brakeshoe (2)
Place in position.
19.
Brakeshoe (2)
Capscrew (21), lock-
Using 9/16-inch socket wrench, install.
washer (22), flat
washer (23), and
sleeve (24)
Pin (3)
Strut (25)
20.
Slide on.
21.
Pin (4)
Brake lever (26)
Slide on.
Pin on brake lever should engage slot
in strut (25).