TM 9-2330-205-14&P
Section Xl. FRAME AND TOWING ATTACHMENT
Page
Page
Safety Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-86
Step Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-86
4-85
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lunette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-84
Landing Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LANDING LEG
This task covers:
INITIAL SETUP
Tools Continued
Tools
Wrench, open-end, 3/4-inch
Handle, reversible, 3/4-inch square
Wrench, open-end, 1 5/16-inch
drive
Jack stands (two)
Materials/Parts
Pliers, diagonal-cutting
Socket, 7/8- by 3/4-inch square
Cotter pin
drive
Socket, 1 1/2- by 3/4-inch square
drive
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Do not begin any removal procedures until the trailer chassis is supported firmly, or the
landing gear could collapse, causing injury to personnel.
Support chassis (1) with jack stands (2).
1.
Trailer
Two jack stands (2)
chassis (1)
Remove.
Lockpin (5) and
Back brace (3) at
2.
Back brace (3) will separate from
clip (6)
landing leg (4)
leg (4).
Two nuts (8) and
Using 7/8-inch socket and 3/4-inch
Back brace (3)
3.
wrench, remove.
two bolts (9)
at mounting
brackets (7)