Table 2-1. Operator/Crew Preventive Maintenance Checks and Services - Continued
NOTE: Within designated interval, these checks are to be performed in the order listed.
For Readiness Reporting
Item to be Inspected
Equipment is Not Ready/
Procedure: Check for and have repaired,
filled, or adjusted as needed
a. Inspect handcrank (1), gearbox (2) and landing
leg foot (3) for secure mounting. Check that hand-
crank holder (4) stows handcrank (1) securely.
b. When cranking landing leg (5), check that
each leg moves smoothly and does not bind. PulI
out handcrank and check for high speed operation.
Push in for low speed operation.