TM9-2330-207-14
Table 2-1. Operator/Crew Preventive Maintenance Checks and Services - Continued
B-Before
D-During
A-After
W-Weekly
M-Monthly
NOTE: Within designated interval, these checks are to be performed in the order listed.
For Readiness Reporting
Item to be Inspected
Equipment is Not Ready/
Procedure: Check for and have repaired,
filled, or adjusted as needed
Available If:
KINGPIN
a. Inspect kingpin (1) for cracks and bends.
b. Inspect upper fifth wheel plate (2) for cracks and
dents.
SUSPENSION
a. Inspect springs for abnormal sag, broken or shifted
leaves, loose or missing leaf clips or U-bolt.
b. Inspect torque rods and axles for obvious damage.
USES AND CIRCUIT BREAKERS (M129 SERIES ONLY)
Check for blown fuses and tripped circuit breakers in
110-volt switch box and circuit breaker load center.
2-30