TM9-2330-207-14
f. Cleaning.
(1) Remove all buildup of dirt, grease, etc., by wiping with a soft cloth.
Cleaning solvent (Fed Spec PD-680) is toxic and flammable. Use solvent
only in a well-ventilated room. Avoid prolonged breathing of solvent
vapors. Keep solvent away from flame. Do not use solvent in excessive
amounts.
(2) Clean, using a clean, soft cloth or a medium bristle brush and cleaning solvent (PD-680) (item 18,
(3) Allow to dry.
g. Inspection.
(1) Inspect for cracks, dents, holes, broken parts and warps.
(2) Inspect for loose, missing or damaged hardware.
(3) Inspect for rust, corrosion and marred paint.
(1) Install shoe (11) and axle (12) to landing leg with two pins (14) and two washers (13).
(2) install holder (7) with bolt (8), nut (5) and washer (6).
(3) Install coupling (2) with bolt (1), nut (4) and washer (3).
(1) Reassemble landing leg (1) to frame of semitrailer with eight bolts (3), sixteen washers (4) and
eight nuts (5). Torque nuts to 150-160 Ib-ft.
(2) Install braces (7) and (8) with four bolts (6), eight washers (4) and four nuts (5). Torque nuts to
150-160 Ib-ft.
(2) Install gear box (4) to landing leg (5) with four bolts (3), eight washers (2) and four nuts (1).
Torque nuts to 150-160 Ib-ft.
k. Installation of Drive Shaft and Coupling (Westran) (fig. 4-60).
(1) Assemble and position shaft (4) and couplings (2) on landing legs.
(2) Secure shaft (4) and couplings (2) with four bolts (3), four washers (5) and four nuts (6).
(3) Crank down lower landing leg and lubricate lower landing let with grease per lubrication chart
(4) Perform operation checks on landing gear installation referring to para. 2-10 and table 2-1, item 7.
4-95