TM 9-2330-211-14&P
AIRBRAKE CHAMBER (Con't)
4-30.
ACTION
REMARKS
ITEM
LOCATION
Using pliers, pull out and discard.
Cotter pin (13)
4.
(Clevis pin (1)
Hex nut (14)
Using
in. wrench, turn until clevis pin (1) is loose.
Slack adjuster (15)
5.
a. Using hammer and drive punch, push out.
Clevis pin (1)
6.
in. wrench, turn hex nut (14) until slack
b. Using
adjuster (15) is away from clevis (2).
Using pliers, unscrew and remove.
Clevis (2)
Pushrod (12)
7.
Using 1 in. wrench, unscrew and remove.
Nut (3)
Pushrod (12)
8.
Using
in. socket, handle, and extension,
Two nuts (4) and
Airbrake chamber (11)
9.
unscrew and remove.
Iockwashers (5)
to mounting
bracket (6)
Airbrake chamber (11)
Slide out.
10.
INSTALLATION
Slide into position. Hole (7) for elbow (8)
Airbrake chamber (11)
11.
Mounting
goes on top.
bracket (6)
in. socket, handle, and extension, screw
Using
Two nuts (4) and
12.
in and tighten.
Iockwashers (5)
Using 1 in. wrench, screw on as far as possible.
Nut (3)
Pushrod (12)
13.
a. Wrap elbow (8) threads with antiseize tape.
Airbrake chamber (11)
Elbow (8) and
14.
b. Screw in elbow (8) until fingertight.
adapter (9)
c. Using pipe wrench, screw in and tighten.
a. Wrap adapter (9) threads with antiseize tape.
15.
Adapter (9)
Outer union nut (10)
b. Screw in outer union nut (10) until fingertight.
c. Using two in. wrenches, screw in and tighten.
4-84