LEFT LANDING GEAR LEG (Con't)
Two screws (26) and
Using screwdriver, unscrew and take off.
and gasket (29)
in. wrench, unscrew and take out.
Dry cleaning solvent P-D-680 is toxic and flammable. Always
wear protective goggles and gloves, and use only in a
well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near
open flame or excessive heat. The solvent's flash point is
100F - 138F (38C - 59C). If you become dizzy while
using cleaning solvent, immediately get fresh air and
medical help. If solvent contacts eyes, immediately wash
your eyes and get medical aid.
Using clean rag dampened with dry cleaning solvent,
wipe grease from working parts.
Two pins (36)
a. Turn bevel gearshaft (31) until pins (36) are
b. Using hammer and punch, drive out pins (36).