TM 9-2330-213-14&P
4-34. SERVICE BRAKE ASSEMBLY MAINTENANCE (M103A3, M105A2, M105A2C, M107A2,
AND M107A2C) (Con't).
d. ADJUSTMENT
NOTE
To ensure an accurate adjustment this procedure must be performed when
brakeshoe are cool.
Perform this adjustment at each wheel to adjust brakes.
1.
Turn upper brakeshoe adjusting bolt (36)
counterclockwise until wheel locks, then back
off enough to allow wheel to turn freely,
2.
Repeat step 1 for lower brakeshoe adjusting
bolt (37) .
FOLLOW-ON TASKS:
Bleed brakes, if axle hydraulic lines were disconnected from backing plate (para 4-39),
Install wheel (para 3-8).
Adjust handbrake cable (para 4-32).
TA505279
4-52