TM 9-2330-213-14&P
4-48. HUB, WHEEL BEARING, AND BRAKEDRUM MAINTENANCE (M103A1, M105A1, AND
M107A1) (Con't).
WARNING
DO NOT handle brakeshoes, brakedrums, or other brake components unless area
has been properly cleaned. There may be asbestos dust on these components
which can be dangerous if you touch it or breathe it. Wear an approved filter mask
and gloves. Never use compressed air or a dry brush to clean brake components.
Dust may be removed using an industrial-type vacuum cleaner. Clean dust or mud
away from brake components with water and a wet, soft brush or cloth. Failure to
follow this warning may result in serious illness or death.
Remove hub (13) and brakedrum (12) from axle (9).
5.
Tap inner wheel bearing cone (11) and oil seal (10) out of hub (13). Discard oil seal.
6.
TA505301
4-77