TM 9-2330-213-14&P
4-59. FENDER AND FENDER EXTENSIONS REPLACEMENT (Con't).
Remove three nuts (10), Iockwashers (11), and screws (12) securing fender extension (16) to fender
2.
(14). Discard Iockwashers.
Remove two nuts (6), Iockwashers (7), screws (8), and fender extension (16) from tank frame (17)
3.
q
Discard Iockwashers.
4.
Repeat steps 1 through 3 to remove fender extension (9) .
Remove three nuts (4), Iockwashers (5), screws (13), and fender (14) from tank frame (17). Discard
5.
Iockwashers.
INSTALLATION
b.
NOTE
Right and ieft fenders (14) and fender extension (9 and 16) are installed the same
way. This procedure covers one side.
1.
Position fender (14) on tank frame (17) and loosely install three screws (13), new Iockwashers (5), and
nuts (4).
Position fender extension (16) on tank frame (17) and loosely install two screws (8), new Iockwashers
2.
(7), and nuts (6).
Loosely install three screws (12), new Iockwashers (11), and nuts (10) to fender extension (16) and
3.
fender (14).
4.
Loosely install screw (15), new Iockwasher (3), and nut (2) to underside of fender extension (16) and
chassis frame (1).
Repeat steps 2 through 4 to install fender extension (9).
5.
Fully tighten three nuts (4), four nuts (6), six nuts (10), and two nuts (2).
6.
4-103