TM 9-2330-213-14&P
4-63. RIGHT REAR DOOR MAINTENANCE (Con't).
4.
Remove ten screws (33), seal (32), retainer (34), spacer (35), and channel (36) from door (4). Discard
seal.
Remove four screws (42) and latch (41) from door (4).
5.
Remove two nuts (37), Iockwashers (38), screws (40), and holder assembly (39) from door (4). Discard
6.
Iockwashers,
7.
Remove nut (28), Iockwasher (27), shim (49), and handle (44) with ring (45) from lock (29). Discard
Iockwasher.
Remove two screws (46), plate (47), and gasket (48) from door (4). Discard gasket.
8.
Remove two cotter pins (25), pins (26), clevises (24), and rods (23) from lock (29). Discard cotter pins.
9.
10.
Remove two nuts (43), four Iockwashers (31), two bolts (30), and lock (29) from door (4). Discard
Iockwashers.
11.
Remove eight nuts (18), screws (22), Iockwashers (21), upper and lower guides (20), and two shims
(19) from door (4). Discard Iockwashers.
12.
c.
ASSEMBLY
1.
2.
Install two shims (19) and upper and lower guides (20) on door (4) with eight new Iockwashers (21),
screws (22), and nuts (18).
Install shim (49) and lock (29) on door (4) with four new Iockwashers (31), two bolts (30), and nuts (43).
3.
4.
Position two rods (23) and clevises (24) on lock (29) and install two pins (26) and new cotter pins (25).
Install new gasket (48) and plate (47) on door (4) with two screws (46).
5.
Install handle (44) with ring (45) on lock (29) with new Iockwasher (27) and nut (28).
6.
7.
Install holder assembly (39) on door (4) with two screws (40), new Iockwashers (38), and nuts (37).
Install latch (41) on door (4) with four screws (42).
8.
Install retainer (34), new seal (32), spacer (35), and channel (36) on door (4) with ten screws (33).
9.
4-118