TM 9-2330-213-14&P
4-65. REAR DOOR SEAL AND BUMPER REPLACEMENT (Con't).
3.
Remove four nuts (16), Iockwashers (15), bolts (13), and bracket (14) from rear corner (4). Discard
4.
Remove nut (21), Iockwasher (22), screw (10), flatwasher (11), and bumper (12) from bracket (14).
Discard lockwasher.
NOTE
Step 5 applies only to lower bumpers,
5.
Remove four nuts (20), Iockwashers (19), screws (18), and clip (17) from bracket (14). Discard
INSTALLATION
b.
NOTE
Step 1 applies only to lower bumpers.
1.
Install clip (17) on bracket (14) with four screws (18), new Iockwashers (19), and nuts (20).
2.
Install bumper (12) on bracket (14) with screw (10), flatwasher (11), new lockwasher (22), and nut (21).
Install bracket (14) on rear corner (4) with four bolts (13), new lockwashers (15), and nuts (16).
3.
TA505338
4-128