TM 9-2330-213-14&P
4-69. 110-VOLT ELECTRICAL SYSTEM MAINTENANCE (Con't).
7.
Connect three inlet wire leads (27) and ground wire lead (26) on bus bars (32) and terminal board (7).
Tighten three screws (24) and screw (23).
Install conduit (4) on box (8) with connector (33).
8.
Position ground wire lead (5) and two wire leads (3) inside box (8),
9.
10.
Install two circuit breakers (31) on bus bars (32) with four screws (29), Repeat for two spare circuit
breakers (25).
Install two wire leads (3) on two circuit breakers (31) and tighten two screws (30).
11.
TA505348
4-139