TM 9-2330-213-14&P
5-4. CARGO BODY MAINTENANCE (M105A1) (Con't).
1.
Remove 12 locknuts (9) and bolts (3) from cargo body (1) and chassis (4). Discard locknuts.
2.
Remove four locknuts (2), bolts (8), flatwashers (7), springs (6), and two brackets (5) from cargo body
(1) and chassis (4), Discard locknuts.
WARNING
Stand clear of lifting device when raising or Iowering cargo body (1). Failure to
follow this warning may result in serious injury or death.
3.
Using a suitable lifting device, lift cargo body (1) from chassis (4).
b. REPAIR
Refer to TB 9-2300-247-40 for instructions on cargo body repair.
INSTALLATION
c.
WARNING
Stand clear of lifting device when raising or lowering cargo body (1). Failure to
follow this warning may result in serious injury or death.
1.
Lift cargo body (1) into position on chassis (4).
NOTE
Perform stop 2 if front mounts on cargo body (1) do not aline with holes on chatsis
(4).
2.
Remove front mounts from cargo body (1) and weld in proper position (TM 9-237).
Position two brackets (5) on cargo body (1) and chassis (4) and loosely install four bolts (8), flatwashers
3.
(7), springs (6), and new locknuts (2).
4.
Loosely install 12 bolts (3) and new locknuts (9) on cargo body (1) and chassis (4).
5.
Fully tighten 16 locknuts (2 and 9).
5-8