TM 9-2330-227-14&P
ACTION
REMARKS
ITEM
LOCATION
REMOVAL - CONTINUED
NOTE
If replacing only one wall receptacle, go to step 15. If replacing a section of wall
receptacles, repeat steps 1 thru 4 for each wall receptacle being replaced.
Using 3/16-inch flat-tip screwdriver,
Elbow cover (7)
5.
pry off.
Using 3/16-inch flat-tip screwdriver,
Two screws (9)
6. Elbow (8) and
unscrew and take out.
base (1)
Using number two cross-tip screwdriver,
Three screws (10)
7. Base (1)
unscrew and take off.
Base (1)
a. Using diagonal cutting pliers,
8. Van body (11)
cut damaged section.
b. Take off.
Take off.
Elbow (8)
9. Base (1) and
van body (11)
INSTALLATION
Measure section to be replaced.
Base (1)
a.
10. Van body (11)
Using hand hacksaw, cut base (1).
b.
c.
Measure position of screw holes on
van body (11), and mark base (1).
d.
Using portable drill and 3/16-inch
twist drill, drill holes in base (1)
at guide marks.
Put in place.
e.