TM 9-2330-227-14&P
COMPOSITE LIGHT ASSEMBLY - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
LAMP, LENS, AND DOOR ASSEMBLY REPLACEMENT - CONTINUED
Using 3/16-inch flat-tip screwdriver,
10.
Six captive
screw in.
screws (6)
If repairing lamp, lens, or door
assembly only, go to FOLLOW - ON
MAINTENANCE.
INSTALLATION
Place in position, and aline with screw
Composite light
11. Frame (1)
holes.
assembly (3)
Two screws (4) and
Put in, and tighten using 9/16-inch
12. Frame (1) and
Iockwashers (5)
composite light
3/8-inch drive.
assembly (3)
Push together.
Eight
13. Wire harness (12)
4-51