TM 9-2330-227-14&P
INSIDE DOMELIGHT, 24-VOLT - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REPAIR - CONTINUED
Using 3/16-inch flat-tip screwdriver,
Screw (2) and
15. Knob (1)
unscrew and take off.
Iockwasher (3)
Lift off.
Knob (1)
16. Rotary switch (4)
Using 7/8-inch box-end wrench, unscrew
17.
Nut assembly (5)
and take off.
Using 3/16-inch flat-tip screwdriver,
Rotary switch (4),
16. Door assembly (6)
pry out.
gasket (7), and
washer (8)
Lamps (11) and (12)
Push in, turn one-quarter turn
19. Sockets (9)
counterclockwise, and take out.
and (10)
Lift off.
20. Door assembly (6)
Rubber seal (13)
Using 3/16-inch flat-tip screwdriver,
Two screws (15)
21. Connector (14)
unscrew and take out.
Pull off.
Connector
22. Body (16)
a. Using 3/16-inch flat-tip screwdriver,
23.
Gasket (17)
pry out.
b. Check for damaged parts.
c. Replace defective parts.
Place in position.
24.
Gasket (17)
Place in position.
Connector
25.
Screw in, and tighten using 3/16-inch
26. Connector (14)
Two screws (15)
flat-tip screwdriver.
Place in proper socket, push in, and
Lamps (11) and (12)
27. Sockets
turn one-quarter turn clockwise.
(9) and (10)
Place in position.
Gasket (7)
28. Door assembly (6)
and washer (8)
Rotary switch (4)
29.
Place in position.
Nut assembly (5)
30. Rotary switch (4)
Screw on, and tighten using 7/8-inch
box-end wrench.
4-84