TM 9-2330-227-14&P
BRAKESHOE ASSEMBLIES, ONE-WHEEL CYLINDER OPTION - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
Two nuts (7), two
3. Two brake
Using 7/16-inch deep well socket and
guide pins (6)
springs (8), and
ratchet handle with 1/2-inch drive,
four cap washers (9)
unscrew and take off.
4. Brake cylinder
Two brakeshoes (11)
Pull apart, and slide off.
(10) and two
anchor pins (1)
Two cotter keys (12)
5. Two retract
a. Using straight-jaw pliers, take out.
spring pins (4)
b. Take out spring pins (4).
Drycleaning solvent PD-680 is both toxic and flammable. Avoid prolonged breathing of
vapors, and avoid skin contact. Use only in well-ventilated area, and keep away from
open flame or excessive heat. Injury to personnel could occur.
Particles blown by compressed air are hazardous. Make certain air stream is directed
away from user and other personnel in the area. To prevent injury, protective goggles
or face shield must be worn when using compressed air.
CAUTION
Use care in handling brakeshoe assemblies. Grease, oil, solvent, or fingerprints on
lining surfaces will ruin linings.
All metal parts
a. Using drycleaning solvent and brush,
6.
clean.
TA231269
4-89