BACKING PLATE, ONE-WHEEL CYLINDER OPTION - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
NOTE
Both backing plates are removed and installed the same way. This task is for one;
repeat for the other.
REMOVAL
a.
Take off.
Spring (2) and cap
1. Brake guide
b.
Repeat for other guide pin.
pin (1)
washer (3)
a.
10 screws (6) and
Using scribe, matchmark backing
2. Backing plate (4)
pIate (4) and spindle (5).
locknuts (7)
and spindle (5)
b.
Using 13/16-inch socket, 6-inch
extension, ratchet handle with 1/2-
inch drive, and 7/8-inch box-end
wrench, unscrew and take off.
Take off.
Backing plate (4)
3. Spindle (5)
a.
Using 3/8-inch and 9/16-inch
Brake guide pin (1),
4. Backing plate (4)
nut (8), and
open-end wrenches, unscrew
Iockwasher (9)
and take off.
Repeat for other brake guide pin (1).
b.
Anchor pin (10),
Using 1/2-inch and 11/16-inch
a.
5.
nut (11), and
open-end wrenches, unscrew
lockwasher (12)
and take off.
Repeat for other anchor pin.
b.
INSTALLATION
Anchor pin (10),
Screw in, and tighten using 1/2-inch
a.
6.
lockwasher (12),
and 11/16-inch open-end wrenches.
Repeat for other anchor pin.
and nut (11)
b.
a.
Brake guide pin (1),
Screw in, and tighten using 3/8-inch
7.
Iockwasher (9),
and 9/16-inch open-end wrenches.
b. Repeat for other brake guide pin.
and nut (8)
Noting matchmarks, put in place.
Backing plate (4)
8. Spindle (5)
4-96