AIR LINES AND FITTINGS
This task covers:
INITIAL SETUP
Materials/Parts
Tools
Bar, pry
Hammer, hand, ball-peen, 2-lb
Personnel Required
Pliers, long round-nose
Screwdriver, cross-tip, number two
Two
Screwdriver, flat-tip, 3/16-inch
Wrench, box-end, 1/2-inch
Equipment Condition
Wrench, box-end, 9/16-inch
Wrench, box-end, 11/4-inch
Wrench, box-end, 11/2-inch
Wrench, open-end, 9/16-inch
Wrench, open-end, 11/16-inch
Wrench, open-end, 7/8-inch
Wrench, open-end, 1-inch
Wrench, open-end, 11/16-inch
Wrench, open-end box, 5/8-inch
Wrench, pipe, 18-inch
ACTION
REMARKS
ITEM
LOCATION
NOTE
New air tubing is manufactured to required length from bulk items. For information on
Both lines are removed the same way. This task is for one; repeat for the other.
4-117