TM 9-2330-227-14&P
SCREENS - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
NOTE
All screens are removed and installed the same way. This task is for one, repeat for
the others.
REMOVAL
Window handle (2)
1. Latch bracket (1)
Release handle (2) from bracket (1)
by pulling up on clip (3).
Clip (3)
Using slip-joint pliers, spread and
2. Window handle (2)
take off.
18 screws (5)
Using number two cross-tip screwdriver,
3. Latch bracket (1)
unscrew and take off.
and screen frame (4)
Screen frame (4)
4. Four wall
Release latch (7), and take off.
brackets (6)
16 screws (9)
Using number two cross-tip screwdriver,
5. Four wall
brackets (6) and
unscrew and take off.
paneling (8)
26 rivets (10)
6.
a. Using 1/8-inch drive-pin punch and
ball-peen hammer, drive punch through
center of rivet head (10) with a solid
blow of hammer.
b. Rivet heads (10) will either fall off
or can be lifted off with 3/16-inch
flat-tip screwdriver.
Four wall
7. Paneling (8)
Take off.
brackets (6)
INSTALLATION
Four wall
8.
Put in place.
brackets (6)
26 rivets (10)
9. Four wall
a. Fill each hole with a rivet (10).
Make sure rivet is fully seated.
brackets (6) and
b. Using 3/16-inch punch and ball-peen
paneling (8)
hammer, drive pin (11) flush with
head of rivet (10).
4-164