TM 9-2330-227-14&P
CHOCK BLOCKS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION - CONTINUED
With aid of assistant, screw in and
Four Iockwashers
14. Chock block
tighten using number two cross-tip
frame (1) and
(3), screws (4),
and nuts (5)
screwdriver, 7/16-inch socket, and
deck (2)
ratchet handle with 3/8-inch drive.
Put in place.
Clip (7)
15. Chain (6)
Cotter pin (9)
a. Put in pin (9), and bend using slip
16. Pin (8)
and washer (10)
joint pliers.
b. Put washer (10) in place.
Plate (11)
Put in place with end on pin (8).
17.
18.
Washer (12) and
a. Put washer (12) in place.
cotter pin (13)
b. Put in pin (13), and using slip-joint
pliers, bend back.
19. Chock block
Chock block (14)
Slide in place.
frame (1)
Chain (16)
Hook.
20. Frame member (15)
Plate (11)
Put in place with end on pin (17).
21. Pins (8) and (17)
Clip (7)
Put in place.
22. Chain (6) and
pin (17)
4-180