TM 9-2330-227-14&P
S e c t i o n II. ELECTRICAL SYSTEM
Page
Page
Wire Harness, 110-Volt, Branch
Connector Receptacle Repair,
Circuit Breakers-to-Lamps and
110-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Connector Receptacle Repair,
Wire Harness, 110-Volt,
24-volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wall Receptacle Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connector Receptacle-to-Main
Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Wire Harness, 24-Volt,
Wire Harness Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31
Domelights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wire Harness, 24-Volt, Running
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WIRE HARNESS, 110-VOLT, BRANCH CIRCUIT BREAKERS-TO-LAMPS AND SWITCHES
This task covers:
INITIAL SETUP
Equipment Condition
Tools
All 110-volt lamps removed
(two required)
All 110-volt switches removed
Screwdriver, flat-tip, 3/16-inch
Socket, 3/8-inch drive, 7/16-inch
Insulation removed as required
(two required)
Wrench, open-end, 7/16-inch
Materials/Parts
Personnel Required
One
Contact with live 110-volt electric wires could result in serious injury or death. Make
sure power source is disconnected before performing maintenance on the electrical
system.
5-2