TM 9-2330-227-14&P
WIRE HARNESS, 24 - VOLT, RUNNING LIGHTS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION - CONTINUED
Feed through.
First cross-
Harness branches
50.
If necessary, use safety wire to
(3) and (4) and main
member (1) to rear
pull connectors through one at a
harness body (5)
of fifth wheel
time.
assembly (2)
Feed through.
Harness branches
51.
Take up slack.
(6) and (7) and main
harness body (5)
Put on.
Main harness (5)
Grommet (8)
52.
Crossmember (1)
Using 3/16-inch flat-tip screwdriver,
Grommet (8)
53.
push in.
Repeat steps 50 thru 53 through remaining
Harness branches
54.
(3), (4), (6),
crossmembers to rear of frame.
and (7) and main
harness body (5)
Front floorboards
55.