TM 9-2330-227-14&P
SPRING BRACKETS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Retaining nut (2)
Using 15/16-inch socket, ratchet handle
1. Screw (1)
with 1/2-inch drive, and 15/16-inch open-
and nut (3)
end wrench, unscrew and take off.
Using 1/2-inch driftpin and ball-peen
Screw (1)
2. Radius rod (4)
hammer, tap out.
and spring
bracket (5)
Two retainers (6)
Take off.
3. Spring
You may have to pry off with 3/8.
bracket (5)
inch flat-tip screwdriver.
Using 5/8-inch socket, 4-inch extension,
Setscrew (8)
4. Sleeve bushing (7)
and ratchet handle with 1/2-inch drive,
and radius rod (4)
unscrew and take out.
Using 1-inch drive-pin punch and ball-
Sleeve bushing (7)
5. Radius rod (4)
peen hammer, drive out.
and spring
bracket (5)
Using straight-nose slip-joint pliers,
Two cotter pins (10)
6. Two nuts (9)
straighten and pull out.
Using 15/16-inch socket, ratchet handle
Two nuts (9)
7. Two screws (11)
5-69