TM 9-2330-227-14&P
SIDE DOOR AND RIGHT REAR DOOR - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
Two screws (2) and
Using number two cross-tip screwdriver,
Iockwasher (3)
unscrew and take off.
Actuator (1)
Take off.
16 screws (6)
Using number two cross-tip screwdriver,
unscrew and take off.
26 rivets (7)
Using 1/8-inch drive-pin punch and ball-
peen hammer, drive punch through center
of rivet head with a solid blow of hammer.
Rivet heads will either fall off or
can be lifted off with screwdriver.
Four inner
Lift off.
frame strips (5)
Cotter pin (9)
Using pliers, straighten legs and
pull out,
Strap (10) and
Lift off.
spring washer (11)
Strap (10)
Pull out.
Screw assembly (13)
Using 3/16-inch flat-tip screwdriver,
unscrew and take out.
Wedge bolt (14)
Take off.
Four screws (15)
Using number two cross-tip screwdriver,
unscrew and take out.
Guide (12)
Take off.
Lower strap
Repeat steps 6 thru 12.
assembly (16)
Roll pin (18)
Using 1/16-inch drive-pin punch and ball-
peen hammer, drive out.
Handle (17)
Pull off.