TM 9-2330-227-14&P
LEFT REAR DOOR - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
R E P A I R - C O N T INUED
a. Apply adhesive to weatherstrip (2)
Weatherstrip (2)
Door (1)
and door (1).
and retainer (3)
b. Place weatherstrip (2) and retainer
(3) in position.
Screw in, and tighten using number two
24 screws (4)
Retainer (3)
cross-tip screwdriver.
a. Apply adhesive to weatherstrip (5)
Weatherstrip (5)
Door (1)
and door (1).
b. Place in position.
a. Apply adhesive to weatherstrip (6)
Weatherstrip (6)
and door (1).
and retainer (7)
b. Place weatherstrip (6) and retainer
(7) in position.
14 screws (8)
Screw in, and tighten using number two
cross-tip screwdriver.
Interior panel (9)
Put on.
Door (1)
47 rivets (10)
Interior
a. Fill each hole with rivet (10).
Make sure rivet is fully seated.
panel (9)
b. Using 3/16-inch drive-pin punch and
ball-peen hammer, drive pin (11) flush
with head of rivet (10).
Screw in, and tighten using number two
36 screws (12)
Door (1)
cross-tip screwdriver.
Plate (13)
Put on.
Four screws (14)
Screw in, and tighten using number two
Plate (13)
cross-tip screwdriver.