TM 9-2330-227-14&P
DECK - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REPAIR - CONTINUED
Put in place making sure tongue and
New board (6)
21. D e c k
groove mate with adjoining board.
Using ball-peen hammer, drive through
Two screws (3)
22. New board (6)
holes.
Repeat for remaining holes.
Have assistant hold screws (3) with
a.
Two screws (3)
23.
3/16-inch flat-tip screwdriver.
and nuts (4)
b.
Screw on nut (4), and tighten using
with 1/2-inch drive.
Repeat for remaining nuts.
Put in place against new board.
a.
Board (5)
24. D e c k
Repeat step 23.
b.
Put in place against mating board.
a.
Board (1)
25.
Repeat step 23.
b.
5-95