TM 9-2330-231-14&P
SERVICE BRAKE-CONTINUED
NOTE
TASK ENDS HERE
HYDRAULIC WHEEL CYLINDER
This task covers:
INITIAL SETUP
Tools
Equipment Condition
Wrench, open-end, 1/2-inch
Wrench, open-end, 11/16-inch
Materials/Parts
Washers, copper
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Backing plate
Two capscrews (3)
Using 1/2-inch wrench, remove.
(1) to wheel
cylinder (2)
2.
Connector (4) to
Bolt (5) and two
Using 11/16-inch wrench, remove.
wheel cylinder (2)
sealing washers (6)
Throw away washers (6).
3.
Backing plate (1)
Wheel cylinder (2)
Remove.
and spark shield (7)
INSTALLATION
4.
Backing plate (1)
Wheel cylinder (2)
Place in position.
and spark shield (7)
5.
Connector (4) to
Bolt (5) and two new
Using 1 1/16-inch wrench, install.
wheel cylinder (2)
sealing washers (6)
4-56