TM 9-2330-231-14&P
METAL AIRBRAKE LINE REPLACEMENT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
AIR FILTER TEE TO UNION - CONTINUED
NOTE
Nuts must be installed on the proper ends of air line. Use the old line as a guide to
avoid making a mistake.
17.
Air line (1)
Two sleeves (2) and
a.
Slide nut (3) onto one end of air
nuts (3 and 4)
line (1).
b.
Slide nut (4) onto other end of air
line (1).
c.
Slide one sleeve (2) onto each end of
air line (1).
18.
Clamp (5)
Install.
19.
Frame rail (6)
Air line (1)
Place in position.
20.
Clamp (5) to frame
Screw (7)
Using screwdriver, install.
rail (6)
21.
Tee (8) to air
Nut (3)
Using 3/4-inch wrench, install.
line (1)
22.
Union (9) to air
Nut (4)
Using 9/16- and 5/8-inch wrenches,
line (1)
install.
AIR HOSE ELBOW TO AIR FILTER
NOTE
This task is for one side only. The steps for the opposite side are the same.
23.
Air filter (10) to
Nut (12)
Using 5/8-inch wrench, remove.
air line (11)
24.
Elbow (13) to air
Nut (14)
Using 5/8-inch wrench, remove.
line(11)
25.
Two clamps (5) to
Two screws (7)
Using screwdriver, remove.
frame rail (6)
4-90