TM 9-2330-231-14&P
HUB AND BRAKEDRUM MAINTENANCE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
WHEEL BEARING REMOVAL
12. Hub (14)
Oil seal (18) and
Using hammer and drift, remove.
inner bearing
Discard oil seal (18).
cone (17)
NOTE
Wiper should be removed only if replacement is necessary because of damage or wear.
13.
Wiper (21)
Using offset screwdriver, pry off.
NOTE
Bearing cups should be removed only if replacement is necessary because of damage or wear.
Bearing cups should always be replaced if bearing cones are being replaced.
14. Hub (14)
Inner and outer
Using puller, remove.
bearing cups (22
and 23)
15.
Bearing cones (16
Clean, inspect, and repack in
and 17) and cups
accordance with TM 9-214 -
(22 and 23)
Inspection, Care, and Maintenance of
TA223918
4-105