TM 9-2330-231-14&P
LUNETTE - CONTINUED
TASK ENDS HERE
LANDING GEAR
This Task Covers:
c.
d.
INITIAL SETUP
Tools
Tools - Continued
Hammer, ball-peen
Socket, 7/6- by 1/2-inch square drive
Handle, reversible, 1/2-inch square
Wrench, box-end, 7/16-inch
drive
Wrench, box-end, 1-inch
Punch Jack stands (two required)
Socket, 7/16- by 1/2-inch square
drive
Materials/Parts
Socket, 3/4- by 1/2-inch square
drive
Roll pins (two required)
TA223923
4-111