TM 9-2330-231-14&P
DATA PLATES
This task covers:
INITIAL SETUP
Tools
Materials/Parts
Drill bit, 3/8-inch
Drivescrews (as required)
Drill, electric, 3/8-inch
Hammer, ball-peen
Punch, center
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Left drawbar
Drivescrews (1)
a. Using hammer and punch, mark center
of each drivescrew.
b. Using drill and bit, drill off heads.
2.
Data plates (2)
Remove.
INSTALLATION
3.
Data plates (2)
Position on drawbar.
4.
Drivescrews (1)
Using hammer, install.
TASK ENDS HERE
TA223941
4-132