TM 9-2330-235-14&P
4-17.
REAR AXLE ASSEMBLY REPLACEMENT (M390C) (Con't).
6.
Connect tubes (25) to connectors (26) at backing plates (24).
7.
Connect hose (3) to connector (30).
8.
Install link (18) on pin (19) attached to upper end of rear brakeshoes, making sure that pin on back side of lever
engages slot in end of link. Secure each link to pin using spring washer (22), flatwashers (21), and slotted washer
(20).
9.
Install brakeshoe return springs (17).
10.
Thread ball end of each push-pull control assembly (7) through hole in backing plate (24) and attach to low end of
lever (23).
11.
Secure each push-pull control assembly (7) to back side of backing plate (24) with cable guide bracket (16), two
12.
13.
TA704311
4-31