TM 9-2330-235-14&P
4-18. HANDBRAKE LEVER REPLACEMENT (M514) (Con't).
2. Remove cotter pin (2), straight pin (3), and disconnect clevis (1) from handbrake lever (10). Discard cotter pin.
3. Remove three nuts (9), lockwashers (8), and screws (6) securing handbrake lever (10) to frame. Remove
handbrake lever and two spacer plates (7). Discard lockwashers.
4. Remove three nuts (13), lockwashers (12), and screws (4) securing plate (5) and bracket (11) to handbrake lever
(10). Remove plate, bracket, and six spacers (14). Discard lockwashers.
b.
INSTALLATION
WARNING
If trailer Is not coupled to towing vehicle, ensure that wheels are securely choked. Failure
to do so may cause trailer to roll, resulting In injury to personnel or damage to equipment.
1.
Assemble handbrake lever (10), six spacers (14), bracket (11), and plate (5) with three screws (4), new
lockwashers (12), and nuts (13).
2.
Install handbrake lever (10) and two spacer plates (7) on frame with three screws (6), new lockwashers (8), and
nuts (9).
3.
Connect clevis (1) to handbrake lever (10) with straight pin (3) and new cotter pin (2).
4.
FOLLOW-ON TASKS:
Lubricate handbrake lever (Chapter 3, Section I).
TA504998
4-35