TM 9-2330-235-14&P
4-22.
SERVICE BRAKE ADJUSTMENT (M514) (Con't).
(d) Turn rear brakeshoe anchor pin (3) counterclockwise until wheel locks.
(e) Turn anchor pin (3) clockwise until only a slight drag is felt when rotating wheel. Tighten nut to secure anchor pin.
(f) Perform MINOR ADJUSTMENT (subpara a).
2.To adjust right brake assembly:
(a) Loosen nuts on front and rear brakeshoe anchor pins (2 and 3).
(b) Install wrench in socket inside end of front brakeshoe anchor pin (2) and turn counterclockwise until wheel locks.
(c) Turn anchor pin (2) clockwise until only a slight drag is felt when rotating wheel. Tighten nut to secure anchor pin.
(d) Turn rear brakeshoe anchor pin (3) clockwise until wheel locks.
(e) Turn anchor pin (3) counterclockwise until only a slight drag is felt when rotating wheel. Tighten nut to secure
anchor pin.
(f) Perform MINOR ADJUSTMENT (subpara a).
4-47