TM 9-2330-235-14&P
4-28.
MASTER CYLINDER REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Rags (Item 12, Appendix E)
Trailer parked on level surface with handbrakes
One gasket
Tools/Test Equipment:
General mechanic's tool kit
Common no.1 shop set
Drain pan
a.
REMOVAL
NOTE
A suitable container should be used to catch any draining brake fluid. Ensure that all spills are
cleaned up.
1. Place a suitable container under master cylinder
(4).
2. Disconnect hose (6) from reducer (5) and allow
brake fluid to drain from master cylinder (4).
securing master cylinder (4) to airbrake chamber
(10) and bracket (3). Remove master cylinder
from bracket and airbrake chamber. Discard
lockwashers.
4. Loosen clamp (1) and remove hose (9) from
vent tube (2).
TA505014
4-59