TM 9-2330-246-14
4-14. INTERVEHICULAR CABLE RECEPTACLE REPLACEMENT
This Task Covers:
c.
Installation
Removal
a.
Cleaning and Inspection
b.
Initial Setup:
Materials/Parts:
Equipment Conditions:
q Intervehicular cable disconnected from semitrailer
Tools/Test Equipment:
General mechanic's tool kit
Four Iockwashers
REMOVAL.
a.
NOTE
This procedure can be used for either front or rear intervehicular cable receptacle. Rear
is illustrated.
Tag wires if identification bands are missing or illegible.
1.
Remove four nuts (10), Iockwashers (9), and screws (7) securing cover (6) and receptacle (3) to chassis frame.
2.
Remove cover and receptacle and disconnect ground wire (8). Discard Iockwashers.
Remove tape from nut (1) and wires (2).
3.
Remove nut (1) from receptacle (3) and slide back over wires (2).
4.
4-19